Freza MTE100-S

Monoblock Sink Armature

  • Special water saving aerator (Bubble flow, with lime breaker, Flow rate: 8lt/mi
  • Special cartridge
  • Special design lever
  • With swivel spout
  • Length of outlet is 190 mm
  • Height of outlet is 273 mm
  • Measurements of hot and cold water flex hose connection are M10x1-3/8” (or 1/2”) 40cm
  • Ideal working pressure is 3-4 Bar
  • To prevent any damage which can be caused by the contaminants inside the

GILDO MLB165-S-R

Wash Basin Armature

  • Special water saving aerator (Bubble flow, with lime breaker, Flow rate:6lt/min)
  • Length of outlet is 125 mm
  • Height of outlet is 110 mm
  • Measurement of hot & cold water flex hose connection are M10x1-3/8” (or 1/2”) 50 cm
  • Ideal working pressure is 3-4 Bar
  • To prevent any damage which can be caused by the contaminants inside the fittings, filtered interval taps are recommended

TULIO MTE135-A

Monoblock Sink Armature

  • Special water saving aerator (Bubble flow, with lime breaker, Flow rate:6lt/min)
  • With swivel spout
  • Length of outlet is 190 mm
  • Height of outlet is 270 mm
  • Measurement of hot & cold water flex hose connection are M10x1-3/8” (or 1/2”) 40 cm
  • Ideal working pressure is 3-4 Bar
  • To prevent any damage which can be caused by the contaminants inside the fittings, filtered interval taps are recommended

NINO SBL05

Over Table Wash Basin Armature

  • Water-saving special aerator (Foam flow, lime crusher, flow rate: 8lt/min)
  • 90° ceramic seal
  • 360° Swivel Spout
  • Compatible with bowl sinks
  • Spout length 149 mm
  • Spout height 306 mm
  • Hot and cold water flexible hose connection dimensions M10x1-3/8” (or 1/2”) 40 cm
  • Ideal working pressure is 3-4 Bar
  • It is recommended to use a filter interval tap with the product in order to prevent any pollution that may occur in the installation from damaging the armature

RETRO MTE180

Monoblock Sink Armature

  • Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min)
  • Special cartridge
  • With swivel spout
  • Length of outlet is 200 mm
  • Height of outlet is 267 mm
  • Retro style design
  • Ceramic handle
  • Measurement of hot & cold water flex hose connection are M10x1-3/8” (or 1/2”) 40 cm
  • Ideal working pressure is 3-4 Bar
  • To prevent any damage which can be caused by the contaminants inside the fittings, filtered interval taps are recommended

GILDO MTE165

Monoblock Sink Armature

  • Special water saving aerator (Bubble flow, with lime breaker, Flow rate:8lt/min)
  • With swivel spout 360°
  • Length of outlet is 193 mm
  • Height of outlet is 241 mm
  • Measurement of hot & cold water flex hose connection are M10x1-3/8” (or 1/2”) 50 cm
  • Ideal working pressure is 3-4 Bar
  • To prevent any damage which can be caused by the contaminants inside the fittings, filtered interval taps are recommended